Rohde & Schwarz RTE Series - Page 1442

Remote control commands
R&S
®
RTE
1442User Manual 1326.1032.02 ─ 20
<n> *
Selects the frame.
<o> *
Selects the byte number.
Return values:
<ValueComplete> ON | OFF
*RST: OFF
Usage: Query only
BUS<m>:I2C:FRAMe<n>:BYTE<o>:STARt?
Returns the start time of the specified data byte.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the byte number.
Return values:
<Start> Range: -100E+24 to 100E+24
*RST: 0
Default unit: s
Usage: Query only
BUS<m>:I2C:FRAMe<n>:BYTE<o>:VALue?
Returns the data value of the specified byte.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the byte number.
Return values:
<Value> To set the value format, use FORMat:BPATtern.
The values below – range, increment and default – are decimal
values.
Range: 0 to 255
*RST: 0
Usage: Query only
Protocols