Rohde & Schwarz RTE Series - Page 1470

Remote control commands
R&S
®
RTE
1470User Manual 1326.1032.02 ─ 20
BUS<m>:SPI:FRAMe<n>:WORD<o>:FMISo?
Returns the formatted value of the specified word on the MISO line.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the word number.
Return values:
<FormattedMISOVal>
Usage: Query only
BUS<m>:SPI:FRAMe<n>:WORD<o>:MOSI?
Returns the data value of the specified word on the MOSI line.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the word number.
Return values:
<MOSIValue> To set the value format, use FORMat:BPATtern.
The values below – range, increment and reset – are decimal
values.
Range: 0 to 4294967295
*RST: 0
Usage: Query only
BUS<m>:SPI:FRAMe<n>:WORD<o>:FMOSi?
Returns the formatted value of the specified word on the MOSI line.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the word number.
Protocols