Rohde & Schwarz RTE Series - Page 1596

Remote control commands
R&S
®
RTE
1596User Manual 1326.1032.02 ─ 20
BUS<m>:I2S:CHANnel:ORDer <ChannelOrder>
Defines if the left or the right channel is the first channel in the frame.
The setting is not available for TDM audio signals.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<ChannelOrder> LFIRst | RFIRst
Left channel first or right first
*RST: LFIRst
BUS<m>:I2S:WLENgth
<WordLength>
Defines the number of bits in an audio data word.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<WordLength> Range: 4 to 32
Increment: 4
*RST: 8
Default unit: bit
BUS<m>:I2S:BORDer <BitOrder>
Sets the bit order of the audio data words.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<BitOrder> LSBF | MSBF
LSB first or MSB first
*RST: MSBF
BUS<m>:I2S:CHANnel:OFFSet <ChannelOffset>
Sets the number of bits between the channel start and the start of the audio word.
Suffix:
<m>
.
1..4
Selects the serial bus.
Protocols