Rohde & Schwarz RTE Series - Page 319

Waveform analysis
R&S
®
RTE
319User Manual 1326.1032.02 ─ 20
Enable
If activated, the XY-waveform is active and shown in a diagram, or it is minimized in a
signal icon.
Remote command:
WAVeform<m>:XYCurve:STATe on page 1236
X-source
Defines the signal source that supplies the x-values of the XY-diagram. Select one of
the following:
●
One of the waveforms of any channel
●
A reference waveform
●
The results of a mathematical function
Remote command:
WAVeform<m>:XYCurve:XSOurce on page 1237
Y-source
Defines the source to be used as the y-axis of the XY-diagram. Select one of the fol-
lowing:
●
One of the waveforms of any channel
●
A reference waveform
●
The results of a mathematical function
XY-diagram