Rohde & Schwarz RTE Series - Page 674

Protocol analysis
R&S
®
RTE
674User Manual 1326.1032.02 ─ 20
Type
The search criterion is defined by "Type". All trigger types are also available for search.
Additional search parameters are provided under "Detailed Search Parameter Setup".
"Sync"
Searches for a sync impulse.
"Word"
Searches for the selected word type.
"Data Word"
Searches for the specified data word. Additional search parameters:
remote terminal address, data pattern and data index.
"Command /
Status Word"
Searches for command or status words. Additional search parame-
ters: remote terminal address, and 11-bit information.
"Command
Word"
Searches for a command word. Additional search parameters: remote
terminal address, subaddress / mode, and data word count / mode
code.
"Status Word"
Searches for a status word. Additional search parameters: remote
terminal address, and status flags.
"Error condition"
Identifies various errors in the frame, see "Error Condition"
on page 668.
Remote command:
SEARch:TRIGger:MILStd:TYPE on page 1624
Sync Type / Word Type
Searches for a sync impulse/ word type. You can search for "Command/Status", "All"
or "Data" sync pulses/ word types.
Remote command:
SEARch:TRIGger:MILStd:TPSPecifier on page 1629
Remote terminal address setup: Condition, RTA
The remote terminal address setup consists of the condition and one or two RTA pat-
terns.
The RTA setup settings are the same as in the MIL trigger setup, see "Remote Termi-
nal Address" on page 664.
Remote command:
SEARch:TRIGger:MILStd:CDST:RCONdition on page 1624
SEARch:TRIGger:MILStd:CMD:RCONdition on page 1624
SEARch:TRIGger:MILStd:DATA:RCONdition on page 1624
SEARch:TRIGger:MILStd:CDST:RMIN on page 1625
SEARch:TRIGger:MILStd:CMD:RMIN on page 1625
SEARch:TRIGger:MILStd:DATA:RMIN on page 1625
SEARch:TRIGger:MILStd:CDST:RMAX on page 1625
SEARch:TRIGger:MILStd:CMD:RMAX on page 1625
SEARch:TRIGger:MILStd:DATA:RMAX on page 1625
Data pattern setup: Condition, Data min, Data max
The data pattern setup consists of the condition and one or two data patterns.
MIL-1553 (option R&S
RTE-K6)