Rohde & Schwarz SMU200A - Page 381

Instrument Function
R&S
®
SMU200A
361Operating Manual 1007.9845.32 ─ 15
Data List Editor
The "Data List Editor" for editing the selected data list is called up in the "List Manage-
ment" submenu of the "Custom Digital Modulation" main menu by means of the "Edit
Data List..." button.
See chapter 4.5, "Editors", on page 105 for description on how to use the editor.
Data List Editor
A list of binary values with a maximum length of 2^31 bits can be entered in the "Data
List Editor". This value corresponds to a file size of approx. 268 Mbyte.
To increase readability, the bits are displayed in groups of four. The current cursor posi-
tion, the length of the list and the list file name are displayed above the list. The offset
starts with the value 0 which corresponds to the bit position on the left side of the first
row, i.e. the beginning of the list. On the left edge of the editor, the last three offset posi-
tions are specified at the beginning of the row.
An existing list can be edited in the insert or overwrite mode.
SCPI command:
[:SOURce<hw>]:BB:DM:DLISt:SELect on page 652
[:SOURce<hw>]:BB:DM:DLISt:DATA on page 650
[:SOURce<hw>]:BB:DM:DLISt:DATA:APPend on page 650
GoTo ← Data List Editor
Opens the entry window for the bit position. The cursor marks the bit at the selected
position.
SCPI command:
n.a.
Baseband Signal - Baseband Block