Instrument Function
R&S
®
SMU200A
410Operating Manual 1007.9845.32 ─ 15
"Goto Id#"
Determines the row number of the segment to be processed next.
This feature is currently limited for the first 32 rows.
SCPI command:
n.a.
Info ← Sequencing Play List
Opens a dialog with detailed information about the currently selected waveform.
See also "Waveform Info" on page 382.
SCPI command:
n.a.
Append
Inserts a new row at the end of the sequencing play list table.
SCPI command:
[:SOURce<hw>]:BB:ARB:WSEGment:SEQuence:APPend on page 619
Delete
Deletes the selected row.
SCPI command:
n.a.
Shift Id# Up/Down
Shifts the selected row up and down.
SCPI command:
n.a.
Sequencing Graphic
Displays the play list graph according to the current configuration.
The graph shows the segment sequence, the segment number and the number of times,
the segment is repeated; considered are only the active segments.
SCPI command:
n.a.
New Sequencing List
Opens the "Select Sequencing List" dialog to enter the name of the new file.
SCPI command:
n.a.
Load Sequencing List
Opens the "Select Sequencing List" dialog to select an existing play list file.
SCPI command:
n.a.
Save Sequencing List
Saves the current entries of the table in a play list file.
Baseband Signal - Baseband Block
To Next Page
Loading...
