Parameters
Introduction to Parameters
1-14
© Siemens AG 2011 All Rights Reserved
SINAMICS G120 / Control Units CU240B/E-2 Parameter Manual (LH11), 01/2011
Description
Explanation of the parameter function.
Values
List of possible parameter values.
Recommendation
Information about recommended settings.
Index
The name and meaning of each individual index is specified for indexed para-
meters, except indexed parameters which belong to a data set (see "Data Set").
Bit array
For parameters with bit arrays, for each bit the following information is provided:
Bit number and signal name
Meaning at signal states 0 and 1
Function diagram (FP) (optional). The signal is shown on this function dia-
gram.
Dependency
Conditions which need to be fulfilled with regard to this parameter. Also includes
special effects which can occur between this parameter and others.
7_1 Nm % lbf ft % p2003
7_2 Nm Nm lbf ft lbf ft -
14_5 kW % HP % r2004
14_10 kW kW HP HP -
21_1 °C °C °F °F -
21_2 K K °F °F -
39_1 1/s
2
%1/s
2
% p2007
Table 1-5 Unit group (p0595)
Unit group Unit selection for p0595 = Reference value
at %
Value Unit
9_1 The values that can be set and the technological units are shown in
p0595 (see Chapter 1.2).
Table 1-4 Unit group (p0505), continued
Unit group Unit selection for p0505 = Reference value
at %
1234
To Next Page
Loading...
