EasyManuals Logo

Barco Event Master E2 Series User Manual

Barco Event Master E2 Series
584 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #128 background imageLoading...
Page #128 background image
R5905948 /12 Event Master Devices128
Input adjustment panel > Main page
This menu is available in two versions according to the input type:
• DVI, HDMI and DisplayPort input types – top half
• Name: Edits the name of the input configuration.
• Sync Status: Detects a good video sync.
• Video Status: Indicates if the connector capacity is
in par with the input resolution.
• Format: The detected video format is shown here.
If Auto Acquire is unchecked below, the desired
input video format is selected here from the drop-
down menu.
• Color Space: The detected color space is shown
here. In the event of a non-VESA standard source
the color space can be unmatched to the
processing. In this case a different color space can
be selected to accommodate the signal. Available
are:
- RGB, Full Range
- RGB, Reduced Range
- SMPTE, Full Range
- SMPTE, Reduced Range
• Colorimetry: Choose the colorimetry ITU-R
recommendation for the output.
Available recommendations are:
- BT.601 (SDTV)
- BT.709 (HDTV)
- BT.2020 (UHD)
- DCI-P3 (digital movie projection)
• Gamma Fx: Choose the Gamma format for the
output.
Gamma Fx values are:
- SDR
- HLG
- PQ/HDR10
• Color Depth: This field displays the color bit depth
of the input signal in number of bits per pixel.
• Connector Capacity: Each connector has the
option to accommodate different bandwidth
standards over its interface. This is referred to as:
- NONE The connector is turned off and cannot
accept any video, bandwidth of this connector
is freed up to be used by another connector.
Connector is grayed out in the graphic
representation. Connectors may need to be
selected to NONE before DL or 4K can be
selected on others.
- SL Single Link The connector can
accommodate a resolution up to 2048 x
1200@60Hz.
• Connector Capacity (continued):
- DL Dual Link The connector can accommodate a resolution up to 2560 x 1600@60Hz.
Note: A dual link connector can also accommodate a 3840 x 1080 or 2048 x 2160 signal, that is also
available in the EDID list once DL is selected for that input.
- 4K The connector can accommodate a resolution up to 4K@60P.
EM GUI orientation

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Barco Event Master E2 Series and is the answer not in the manual?

Barco Event Master E2 Series Specifications

General IconGeneral
BrandBarco
ModelEvent Master E2 Series
CategoryDJ Equipment
LanguageEnglish

Related product manuals