R5905948 /12 Event Master Devices 143
Output adjustment panel > Connector Menu
Connector Menu: Output Adjustment—DP
For DP 1.2 outputs:
• Color/Sample/Bit: Adjusts the color space (RGB or
YCbCr), sampling rate (4:4:4) and bit depth (8, 10,
or 12) of the output signal.
• Color Space: Adjusts the color range (RGB or
SMPTE, Full or Reduced).
• Colorimetry: Choose the colorimetry ITU-R
recommendation for the output.
Available recommendations are:
- BT.601 (SDTV)
- BT.709 (HDTV)
- DCI-P3 (digital movie projection)
• Gamma Fx: Choose the Gamma format for the
output.
The Gamma Fx value for DP connectors is SDR.
• Connector Capacity: If the connector is not
assigned to a Destination as above, the capacity
can be changed. Once included in a Destination
configuration this needs to be managed thru the
Adjust pane of the Destination.
EM GUI orientation
To Next Page
Loading...