R5905948 /12 Event Master Devices394
Image 14-13: Fansink installation
1
PCBA
2
Fansink (heatsink fan)
3
Fansink pins
4
Pin holes
Image 14-14: Mezzanine installation
1
PCBA (with fansink installed)
2
Mezzanine
3
Mezzanine BNC connectors
4
Mainboard BNC connectors
2. Place kapton tape on the rear portion of the mainboard BNC connectors.
(Kapton tape is not needed on the mezzanine BNC connectors.)
3. Install the mezzanine on the PCBA.
E2 Maintenance
To Next Page
Loading...