The Address List
Manpack Transceiver 2110 series Reference Manual 177
To set up the key to call several stations in succession:
1 Decide on the stations you want to call in an emergency, the type of call you want to
make to each station, and the order in which you want to make the calls.
1 Enter the details of the first call you want to make into the Emergency 1 entry (for
help see page 115, Editing an entry in a list).
1 Create an entry in the Address List, name it Emergency 2 and enter the details of the
second call you want to make (for help see page 182, Creating an entry in the
Address List).
1 Create an entry for each subsequent call you want to make, naming the entries
Emergency 3, Emergency 4 and so on.
The number of Emergency entries you can create is limited by the number of entries
you can store in the Address List.
NOTE
If you want to use a special ALE address syntax, you should set up
the Emergency entries to make calls that create an implicit link, or
link immediately first, for example, an ALL call. Address syntaxes
that require a response should be set up in the last Emergency entry
of the chain call, if required.
To Next Page
Loading...
Need help?
General
