Codan 2110 series User Manual

Making and receiving calls
Manpack Transceiver 2110 series Reference Manual 215
If you are making a... Do this...
Channel Test call In an ALE/CALM network:
• wait for the LQA screen to display the best
channel
In a Codan Selcall network:
• listen for the revertive signal
NOTE
The call is ended automatically but can be
aborted by pressing PTT or SCAN.
Emergency call
Selective call
In an ALE/CALM network:
• wait until a message informs you that the call has
been successful
• hold down PTT then speak, releasing PTT when
you have finished speaking
•press SCAN to end the call and resume scanning
In a Codan Selcall network:
• wait until a message informs you that the call has
been sent and listen for audible beeps transmitted
from the other station
• hold down PTT then speak, releasing PTT when
you have finished speaking
•press SCAN to end the call and resume scanning
Get Position call
Get Status call
Message call
Send Position call
• wait until a message informs you that the call has
been completed
NOTE
The call is ended automatically but can be
aborted by pressing PTT or SCAN.
Phone call • wait until you hear a reply from the person you
called
• hold down PTT then speak, releasing PTT when
you have finished speaking
•press SCAN to end the call
In an ALE/CALM network:
The transceiver resumes scanning.
In a Codan Selcall network:
The transceiver prompts you to send a hangup signal.
If you want to send a hangup signal, press .
If the other party has sent a hangup signal via the
phone line, press .
The transceiver resumes scanning.

Codan 2110 series Specifications

General

Brand	Codan
Model	2110 series
Category	Transceiver
Language	English