The Control List
240 Manpack Transceiver 2110 series Reference Manual
Secure Mode Set the default secure mode of the CES-128 voice encryptor when
you press SEC.
If you want to:
• use a secure key for encryption that is common to all Codan
CES-128 voice encryptors, select Global
• use a secure key for encryption that has been created for use in
your organisation, select Corporate
Global
Time Local Set the local date and time. For more information see page 90,
Setting the time and date.
Time Screen Display the current date and time. For more information see
page 90, Setting the time and date.
Time Zone Offset Set the difference between the time displayed on the date/time
screen and UTC. For more information see page 90, Setting the
time zone offset.
0 hours
Update Main Menu Refresh lists in the Main Menu.
Welcome Screen Display the welcome screen. This screen is briefly displayed when
the transceiver is switched on.
Welcome Text Store up to three lines of text to be displayed on the welcome
screen. If all three lines of text are blank, the welcome screen is not
displayed when the transceiver is switched on. If you want to
display a self address following power on, or set the transceiver to
beep when it enters this screen, you can enter a keyword into the
welcome text (see page 267, Welcome text).
Table 31: Entries in the Control List (cont.)
Name of entry Use this entry to... Default
To Next Page
Loading...
Need help?
General
