About this manual
10 Manpack Transceiver 2110 series Reference Manual
shielding A metallic barrier that is positioned between a noise source and
the transceiver to minimise noise interference.
sideband A band of frequencies that is above or below a modulated
carrier frequency.
standing wave ratio
(SWR)
The ratio of forward and reflected powers between a transmitter
and its antenna load, which can be measured by an SWR meter.
station A point of communication consisting of a transceiver, a power
supply, an antenna, control and accessory devices, ancillary
equipment, and appropriate connecting cables.
transceiver A transceiver unit with speaker, handset, and battery.
Wildcard call An ALE address syntax used to broadcast to any station that is
tuned to the same frequency in an ALE/CALM network, or
scanning the network. The Wildcard address syntax, which ALE
stations recognise, uses the wildcard character ? as a placeholder
for characters within a self address of a receiving station.
A multiple Wildcard call uses multiple wildcard addresses in the
one call. Stations with matching addresses respond to the call.
The Wildcard address syntax may be used in Emergency,
Message, Phone, Selective, and Send Position calls if the MIL-
STD-188-141B ALE option is installed (2110 only).
This term... Means...
To Next Page
Loading...
Need help?
General
