CES-128 voice encryptor option
Manpack Transceiver 2110 series Reference Manual 281
Switching between Global and Corporate secure modes
Whenever you switch on the CES-128 voice encryptor it enters the secure mode that is
set in the Secure Mode entry in the Control List. For help on changing the default secure
mode see page 112, Changing a setting in the Control List.
By default, the Secure Mode entry in the Control List is admin hidden, so you cannot
change between Global and Corporate mode unless you are logged in to admin level, or
you show the Secure Mode entry at user level (see page 128, Logging in to admin level
or page 119, Hiding and showing settings).
To switch between the Global and Corporate secure modes while using the CES-128
voice encryptor:
1 Hold SEC.
1 Use or to toggle between Global or Corporate <nn>.
1 If you want to use a PIN, enter the 4-digit PIN that you have agreed to use with
others for this session.
1 Press .
NOTE
The default secure mode is not changed. Next time you switch on the
CES-128 voice encryptor, the default secure mode is entered.
To Next Page
Loading...
Need help?
General
