CES-128 voice encryptor option
Manpack Transceiver 2110 series Reference Manual 285
Using the CES-128 voice encryptor in standby mode
If you are operating in a communication network that has transceivers that use secure
communications, non-secure communications, or both, then use the secure standby
mode. When the CES-128 voice encryptor is in standby mode, you can hear all
communications on the selected channel that are made by other transceivers in clear
mode. If your transceiver detects an encrypted transmission from another station that is
in secure mode, your transceiver will exit secure standby mode and go secure so that you
can hear the secure, decrypted communication.
To enter standby mode:
1 Press SEC to switch on the CES-128 voice encryptor, or hold SEC to enter a PIN.
1 Press
*
.
The CES-128 voice encryptor switches to standby mode.
If you are in the Channel List, the CES-128 voice encryptor in standby mode is
indicated by the text Secure <index>[P] underlined at the left of the channel
screen. For example:
NOTE
Extra CES-128 voice encryptor features that affect operation during
secure standby mode are available by using special commands in the
Message 10 entry. For more information see page 476, Controlling access
to CES-128 voice encryptor options.
NOTE
The transceiver automatically switches from standby mode to secure
mode if an encrypted transmission is received.
To Next Page
Loading...
Need help?
General
