Covidien WarmTouch - A.5 Enclosures

Parts and Accessories
A-6 Service Manual
A.5 Enclosures
TableA-4.Parts List – Enclosures
Kit or Part Part
Number
Figure Procedure
WT-CWU Front Enclosure Kit
1 - Front Enclosure
1 - Keypad, WarmTouch (attached to enclosure)
1 - No Free Hosing Label (attached to enclosure)
1 - Equipotential Ground Label (attached to enclo-
sure)
7 - Screw #6 x 7/16",Plastite, PH HD,SS
10088280 Figure A-1 Page 12-2
WT-CWU Filter Enclosure Kit
1 - Enclosure Air Filter, WarmTouch
1 - Gasket, with Adhesive, WarmTouch (attached to
enclosure)
3 - Screw, #8 x .50, Plastite, PH HD
4 - Screw 8-32 x .38,Truss HD,ST Zinc
1 - Foot, Filter Cover (Short) (attached to enclosure)
1 - Bed Hook (attached to enclosure)
1 - Symbols Label (attached to enclosure)
10088305 Figure A-3 Page 12-12
WT-CWU Rear Enclosure Kit
1 - Enclosure, Rear, WarmTouch
1 - Gasket, with Adhesive, WarmTouch
2 - Machine Screw #4-40 x 3/8” PH PAN HD LG
1 - Cable Tie, Adhesive
1 - Insert, Heater Cone
1 - Screen, Heater
4 - Screw, #6 x .38" Long, Sht Metal T-A,ST Zinc
8 - Screw #6 x 7/16",Plastite, PH HD,SS
10088297 Figure A-6 Page 12-15