Covidien WarmTouch - 7.5.6 Thermostat Test

Performance Tests
Service Manual 7-11
7.5.6 Thermostat Test
Use the thermostat test to verify that the thermostat opens when an over-tem-
perature condition occurs and that an audible and visual alarm is generated.
To perform the thermostat test:
1. Perform steps 1 and 2 of the power-on test (page 7-3).
2. Press the Menu key on the Main screen. The Menu screen appears (Figure 7-6).
Figure7-6.Menu Screen
3. Press the System Test key. The Key Code screen appears (Figure 7-7).
Figure7-7.Key Code Screen