To Next PageTo Next Page
Need help?Do you have a question about the Ducati DARK 749 and is the answer not in the manual?
General| Transmission | 6-speed |
|---|---|
| Frame | Tubular steel trellis frame |
| Front Suspension | Showa 43 mm upside-down fully adjustable fork |
| Front Brake | 2 x 320 mm discs, 4-piston calipers |
| Rear Brake | 245mm disc, 2-piston caliper |
| Seat Height | 810 mm (31.9 in) |
| Fuel Capacity | 15.5 l (4.1 US gal) |
| Engine | L-twin cylinder, 4 valve per cylinder Desmodromic, liquid cooled |
| Fuel System | Electronic fuel injection |
| Rear Suspension | Progressive linkage with monoshock |
| Dry Weight | 187 kg (412 lb) |
Details the manual's structure, how to use it, and provides basic technical background for technicians.
Explains symbols, abbreviations, and references used throughout the manual for quick and easy consultation.
Covers general safety rules and specific warnings for maintenance operations, highlighting potential hazards.
Details how to identify the specific motorcycle model, including frame and engine numbers and EC plate.
Provides detailed technical specifications including general data, transmission, engine, chassis, and electrical systems.
Presents the overall dimensions of the motorcycle, including length, width, height, wheelbase, seat height, and ground clearance.
Lists recommended fuels, oils, and lubricants for the motorcycle, including capacities and specifications.
Details the correct torque values for tightening various fasteners and components on the frame and engine.
Lists special tools required for engine and frame service operations, often with part numbers.
Covers precautions for the initial period of motorcycle use and pre-ride checks.
Details the procedure for starting the engine and warming it up, considering ambient temperature.
Provides a schedule of periodic maintenance tasks, indicating intervals for checks, replacements, and adjustments.
Covers various maintenance operations, including fluid checks, filter changes, adjustments, and component replacements.
Describes the diagnostic instrument (DDS), its power supply, and lists various sensors and diagnostic procedures.
Details the removal and refitting of the headlight fairing, rear-view mirrors, and related components.
Covers the removal and refitting of side fairings and the front shield.
Details the removal, disassembly, and reassembly of the fuel tank, seat, and rear fairing assembly.
Covers the removal and refitting of the front mudguard.
Explains adjusting and disassembling the throttle and choke control cables and their respective components.
Details the removal and refitting of the clutch cylinder and slave cylinder assemblies.
Covers the removal and refitting of the front brake master cylinder and system.
Details the removal and disassembly of the rear brake control system.
Covers the removal, disassembly, and refitting of the gear change control components.
Details the removal and refitting of the seat release mechanism for dual seat versions.
Covers the removal, overhauling, and refitting of the front wheel, including hub bearings and rim inspection.
Details the removal, overhauling, and refitting of the front fork, including internal components and oil charge.
Covers maintenance instructions, removal, overhauling, and refitting of the front brake system.
Covers the removal, overhauling, and refitting of the rear wheel, including brake disc and chain inspection.
Details the removal, inspection, overhauling, and refitting of the rear swingarm and its components.
Covers the removal and refitting of the rear brake system, including discs, calipers, and master cylinder.
Details the rear suspension system, including shock absorber, rocker arm, and tie-rod removal and overhaul.
Covers inspection, removal, and replacement of the final drive components like sprocket, chain, and seals.
Details the removal and refitting of the handlebars.
Covers adjusting steering bearings, steering head angle, and removing/refitting steering tube components.
Details the removal and reinstallation of the steering damper.
Covers the removal and refitting of the footpegs.
Details the removal, disassembly, reassembly, and refitting of the side stand.
Covers the disassembly, checking, and reassembly of structural components and the frame.
Details the removal of the rear number plate holder.
Provides a general overview of the fuel system and its components.
Details the removal and replacement of the fuel tank and filler cap assembly.
Covers the removal, disassembly, and refitting of the airbox and throttle body assembly.
Describes the procedure for changing the air filters.
Covers the exhaust system, including removal and reassembly.
Details the canister filter system, including removal and refitting, specifically for US versions.
Provides procedures for removing and installing the complete engine assembly.
Details the removal, disassembly, overhaul, reassembly, and refitting of the oil pump and oil filter.
Covers the removal, inspection, and reinstallation of the oil cooler.
Details the removal and refitting of the oil breather tank.
Describes the coolant tank, its capacity, and the procedure for disassembly and refitting.
Details the removal, replacement of electric fans, and refitting of the water cooler and hoses.
Covers the disassembly and reassembly of the coolant pump.
Covers checks and adjustments for valve clearances, valve lift, and engine timing.
Details the removal and refitting of timing covers, tensioners, pulleys, and belts.
Covers the removal and refitting of the cylinder head side covers.
Details the removal, checking, and refitting of camshafts and related components.
Covers the removal, overhaul, and reassembly of valves, rocker arms, and head components.
Details the disassembly, overhaul, and refitting of the cylinder and piston assembly.
Provides a description of the clutch unit and details its disassembly and reassembly.
Covers the removal, disassembly, and reassembly of the clutch cover.
Details the removal and refitting of the primary drive gears and checking meshing play.
Covers the disassembly and reassembly of the gear selector lever and gear stopper unit.
Details the removal, disassembly, overhaul, and reassembly of gearbox shafts and related components.
Covers the removal and refitting of the generator cover, flywheel, and related components.
Details the removal and reinstallation of external engine casing components.
Covers the disassembly, overhaul, and reassembly of the engine casings.
Details the disassembly, overhaul, and refitting of the connecting rod assembly.
Provides the main wiring diagram key and shows the position of wiring on the frame.
Details the charging system operation, battery checks, and recharging procedures.
Describes the electric starting system, including the starter motor, contactor, and safety functions.
Covers the removal and refitting of the instrument panel, bulbs, headlights, and turn indicators.
Details checking signaling system components, bulbs, and rear view mirror adjustment.
Covers checking safety components like fuses and the immobilizer system.
Explains the immobilizer system, programming, and override procedures.
Provides information on using the DDS tester and multimeter for electrical system checks.
