Icom IC-7100 Advanced Instructions

VOX function ............................................................................6-2
Using the VOX function D ...........................................................6-2
Adjusting the VOX function D ......................................................6-2
Break-in function .....................................................................6-3
Semi Break-in operation D ..........................................................6-3
Full Break-in operation D ............................................................6-4
Speech compressor function .................................................6-5
Transmit lter width selection ................................................6-6
Monitor function ......................................................................6-7
Split frequency operation .......................................................6-8
Direct frequency shift input D ......................................................6-9
Split Lock function D ...................................................................6-10
Quick Split function .................................................................6-11
Split frequency offset setting D ...................................................6-12
Measuring SWR .......................................................................6-13
Spot measurement D ..................................................................6-13
Plot measurement D ...................................................................6-14
SWR Graph Set mode D .............................................................6-16
DTMF Memory encoder ...........................................................6-17
Programming a DTMF code D ....................................................6-17
Transmitting DTMF code D .........................................................6-18
Transmitting DTMF code (Direct Input) D ...................................6-19
Setting DTMF transfer speed D ..................................................6-20
6-1
Section 6
FUNCTIONS FOR TRANSMIT
Previous view

Icom IC-7100 Specifications

General

Supply	13.8 V DC ±15%
Voltage	13.8 V DC
Operating Temperature	-10°C to +60°C
Frequency Coverage	0.030-199.999 MHz, 400-470 MHz
Modes	SSB, CW, AM, FM, DV
Output Power	HF/50MHz: 100W, 144MHz: 50W, 430MHz: 35W
Receiver Type	Superheterodyne
Antenna Connector	SO-239 (HF/50MHz/144MHz), N-type (430MHz)
Weight	Main unit: 2.3 kg
Type	Base/Mobile
Frequency Range TX	1.8–54 MHz, 144–148 MHz, 430–450 MHz
Frequency Range RX	0.030–199.999 MHz, 400–470 MHz
Memories	505
Current Consumption	TX: 22 A, RX: 1.2 A