EasyManua.ls Logo

Icom IC-7100

Icom IC-7100
375 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
SET MODE
17-23
RX HPF/LPF (Default: [----] - ----)
Tone Control > RX > (Mode) > RX HPF/LPF (RX HPF/
LPF)
(Mode: SSB/CW/RTTY/AM/FM/DV)
First select the operating mode, then set the receive
audio high-pass filter to between 100 Hz and 2000 Hz
in 100 Hz steps.
RX HPF/LPF (Default: ---- - [----])
Tone Control > RX > (Mode) > RX HPF/LPF (RX HPF/
LPF)
(Mode: SSB/CW/RTTY/AM/FM/DV)
First select the operating mode, then set the receive
audio low-pass filter to between 500 Hz and 2400 Hz
in 100 Hz steps.
RX Bass (Default: 0)
Tone Control > RX > (Mode) > RX Bass (RX Bass)
(Mode: SSB/AM/FM/WFM/DV)
First select the operating mode, then set the receive
audio bass level to between –5 and +5.
RX Treble (Default: 0)
Tone Control > RX > (Mode) > RX Treble (RX Treble)
(Mode: SSB/AM/FM/WFM/DV)
First select the operating mode, then set the receive
audio treble level to between –5 and +5.
TX Bass (Default: 0)
Tone Control > TX > (Mode) > TX Bass (TX Bass)
(Mode: SSB/AM/FM/DV)
First select the operating mode, then set the transmit
audio bass level to between –5 and +5.
TX Treble (Default: 0)
Tone Control > TX > (Mode) > TX Treble (TX Treble)
(Mode: SSB/AM/FM/DV)
First select the operating mode, then set the transmit
audio treble level to between –5 and +5.
TBW (WIDE) (Default: 100 - 2900)
Tone Control > TX > SSB > TBW (WIDE) (TBW
(WIDE))
(Mode: SSB)
Set the lower and higher cut-off frequencies of the
transmission passband width for your wide setting.
• Lower: 100, 200, 300 or 500 Hz
• Higher: 2500, 2700, 2800 or 2900 Hz
TBW (MID) (Default: 300 - 2700)
Tone Control > TX > SSB > TBW (MID) (TBW (MID))
(Mode: SSB)
Set the lower and higher cut-off frequencies of the
transmission passband width for your middle setting.
• Lower: 100, 200, 300 or 500 Hz
• Higher: 2500, 2700, 2800 or 2900 Hz
TBW (NAR) (Default: 500 - 2500)
Tone Control > TX > SSB > TBW (NAR) (TBW (NAR))
(Mode: SSB)
Set the lower and higher cut-off frequencies of the
transmission passband width for your narrow setting.
• Lower: 100, 200, 300 or 500 Hz
• Higher: 2500, 2700, 2800 or 2900 Hz
Tone Control Set mode
Previous view

Table of Contents

Other manuals for Icom IC-7100

Related product manuals