19
MAINTENANCE
19-9
Programming the Repeater list1.
q Select the desired repeater group in the “Repeater
List” folder on the tree view screen of the CS-7100.
w Program each item of the repeater list, using the CS-
7100.
• See the Help le of the CS-7100 for assistance.
Exporting the Repeater list2.
q Select the “Repeater List” folder or each repeater
group on the tree view screen.
w Click “Export” in the [File] menu, and then click
“Group...” or “All...”.
NOTE: If you select the “Repeater List” folder in
step q, “Group...” cannot be selected.
• Group... : Exports repeater information programmed in
only the selected group.
• All... : Exports repeater information programmed in all
groups.
When the “Save as” window appears, save the data e
in a CSV format using a individual file name. Then
save it in a CSV format file to a folder on your PC,
and the exportation is completed.
Please read this section before programming and ex-
porting the repeater list in a Comma Separated Values
(CSV) format file.
Programming and Exporting the repeater list in a CSV format le
“Repeater List”
folder
Repeater group
<Tree view screen of the CS-7100>
To Next Page
Loading...
