9
D-ST
AR OPERA
TION <AD
V
ANCED>
9-25
NOTE
In the “CALL SIGN” screen, touch “UR:” for 1 second
to open the function window. The function window
displays the “Edit,” “Clear” and “Add To Your Memo-
ry” items, and then touch the desired item.
• Touch “Edit” to enter the Call sign edit screen.
• Touch “Clear” to delete the “UR:” setting.
• Touch “Add To Your Memory” to enter the “YOUR
CALL SIGN EDIT” screen.
Touch [CS]
Touch the de-
sired call sign to
be changed
(Example
: UR:CQCQCQ)
Example: When changing “UR:” in the 438.03 MHz, DV
mode
Touch the
selection
( Example: Your
Call Sign)
Touch the
station
( Example:
ICOM 01)
Changing the Call sign setting
Sets or displays the “UR,” “R1,” “R2” and “MY” call signs
to be used for DV operation.
Except for the DR mode, sets the desired call signs to
be used for DV operation in this screen.
D Simplex operation
While in the Simplex operation, the “R1” and “R2” call
signs cannot be set. And while in the DR mode, the
“UR” call sign cannot be changed.
Example :
In this content explains that is operating in the memory
mode, and changing the “UR:” call sign.
Select any other than DR mode. q
(Example: Memory mode)
Push w
(C) one or more times to select the
“M-2” screen (M-2 menu).
Touch [CS]( e D) to enter the “CALL SIGN” screen.
Touch “UR:” or “MY:.” (Example: UR: CQCQCQ) r
• The “YOUR SELECT” screen is displayed.
• In the simplex operation, the “R1:” or “R2:” cannot be se-
lected.
t Touch a desired selection. (Example: Your Call Sign)
• The “YOUR CALL SIGN” screen is displayed.
y Touch a desired station. (Example: ICOM 01)
• The selected call sign is displayed in the “CALL SIGN”
screen.
Push u
(C) to exit the “CALL SIGN” screen.
If you want to memorizes this setting, touch [MW]( i D)
for 1 second in the “M-1” screen (M-1 menu).
To Next Page
Loading...
Need help?
General
