Icom IC-7100

10
GPS/GPS-A OPERATION
10-12
Adding or editing GPS memory (Continued)
D Clearing a GPS data
GPS memories can be cleared (erased).
Please note that erased GPS memories cannot be re-
stored.
There are two ways to clear the memories;
• Erasing all GPS memory in a group.
• Erasing a specic memory channel.
Example:
Erasing all in the “(No Group).”
Push q
SET
(C) to enter the Set mode.
Touch the “GPS MEMORY” item of the “GPS” Set w
mode.
GPS > GPS Memory
• If the specied item is not displayed, touch [∫] or [√](D)
one or more times to select the page.
Touch the desired group for 1 second to select. e
Touch “Delete All In Group.” r
• The confirm screen “Delete all in group?” appears.
• Touch [YES](D) to clear.
• The selected GPS memory is cleared, and then returns
to the “GPS MEMORY” screen.
Deleting a specific GPS memory channel
GPS memories can be deleted.
Touch to select the memory group where the de- q
sired GPS memory to delete is located, as illustrat-
ed below. (Example: B: OSAKA 02)
Touch the desired GPS memory for 1 second. (Ex- w
ample: Icom 02 A)
Touch “Delete,” and then [YES]( e D) to delete.
• The selected GPS memory channel is deleted.
Touch to select the memory
group.
Touch for 1 second to select the
memory channel.
Touch “Delete.”
All GPS memory in the group is cleared.
Touch for
1 second.
Previous view