4
RECEIVE AND TRANSMIT
4-18
• Preprogrammed contents
CH Contents
RT1
↵DE ICOM ICOM K↵
RT2
↵DE ICOM ICOM ICOM K↵
RT3
↵QSL UR 599–599 BK↵
RT4
↵QSL DE ICOM ICOM UR 599–599 BK↵
RT5
↵73 GL SK↵
RT6
↵CQ CQ CQ DE ICOM ICOM ICOM K↵
RT7
↵MY TRANSCEIVER IS IC–7100 & ANTENNA IS A
3–ELEMENT TRIBAND YAGI.↵
RT8
↵MY RTTY EQUIPMENT IS INTERNAL FSK UNIT &
DEMODULATOR OF THE IC–7100.↵
Touch “Edit”
• RTTY memory programming mode
• RT1 default indication
Input a space
Select Alphabet or Number input
Move the cursor
Move the cursor
Delete a character
Select a Symbol
Enter
Cancel edit
Touch [EDIT]
Touch the desired
channel for 1 sec-
ond
D Editing an RTTY memory
The contents of the RTTY memories can be set on the
RTTY Memory (Edit) screen. The RTTY memory can
memorize and retransmit 8 RTTY message for often-
used RTTY information. The total capacity of the RTTY
memory is 70 characters per memory channel.
• Programming contents
q
In the RTTY mode,
push
(C) one or more
times to select the “M-2” screen (M-2 menu).
Touch [DEC]( w D) to display the RTTY decoder
screen.
• Touch [WIDE](D) to toggle the decode screen size be-
tween normal and wide.
Touch [<1>]( e D) to display the RTTY decoder (2)
screen.
• Touch [<1>] or [<2>](D) to toggle between the RTTY de-
coder and the RTTY decode (2) screens.
Touch [EDIT]( r D) to display the “RTTY MEMORY”
(Edit) screen.
• The memory contents are displayed.
Touch for 1 second on a desired memory channel to t
be edited, and then touch “Edit.”
• Touch [p] or [q](D) to select the displayed page.
• The memory programming screen appears.
Touch the desired block one or more times to select y
the desired character or symbol.
Selectable characters and symbols
A to Z, 0 to 9, ! $ & ? " ' – / . , : ; ( ) ↵
(space)
• Touch “AB⇔12” to toggle between the Alphabet input
and Number input mode.
• Touch [CLR]
(D) to delete the selected character, symbol
or number.
• Touch [SYMB]
(D) to open the Symbol character selec-
tion window.
• Touch “” to input a space.
Touch [ u f](D) or [g](D) to move the cursor back-
wards or forwards.
Repeat steps i y and u to program up to 70 charac-
ters of memory contents, and then push [ENT](D).
Touch [ o ](D) or push
(C) to return to the
RTTY Decode (2) screen.
The functions for RTTY operation (Continued)
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D:
Display (Touch screen)
To Next Page
Loading...
