Icom IC-7100 Advanced Instructions

11
MEMORY OPERATION
11-14
Memo pad function (Continued)
You can call up a Memo pad by pushing
MPAD
(R)
one or more times while in either the VFO or Memory
mode.
• The Memo pad content is called up, starting from the most
recently written.
When you call up a Memo pad, the previously displayed
content is automatically stored in a temporary pad. The
temporary pad can be recalled by pushing
MPAD
(R)
one or more times.
• You may think there are 6 Memo pads because 6 different
frequencies (5 are in Memo pads and 1 is in the temporary
pad) are called up by
MPAD
(R).
If you change the contents called up from a Memo
pad, the stored temporary pad content is replaced
with the changed content.
D Calling up the Memo pads
Operating frequency of the VFO
or Memory mode
Memo pads
Newest
Oldest
MPAD
MPAD
Previous view

Icom IC-7100 Specifications

General

Supply	13.8 V DC ±15%
Voltage	13.8 V DC
Operating Temperature	-10°C to +60°C
Frequency Coverage	0.030-199.999 MHz, 400-470 MHz
Modes	SSB, CW, AM, FM, DV
Output Power	HF/50MHz: 100W, 144MHz: 50W, 430MHz: 35W
Receiver Type	Superheterodyne
Antenna Connector	SO-239 (HF/50MHz/144MHz), N-type (430MHz)
Weight	Main unit: 2.3 kg
Type	Base/Mobile
Frequency Range TX	1.8–54 MHz, 144–148 MHz, 430–450 MHz
Frequency Range RX	0.030–199.999 MHz, 400–470 MHz
Memories	505
Current Consumption	TX: 22 A, RX: 1.2 A