Icom IC-7100

10
GPS/GPS-A OPERATION
10-7
Adding or editing GPS memory
D GPS memory
You can add GPS data to GPS Memory.
You can add your own position, other station’s positions
or any positions that are manually programmed.
The GPS Memory is capable of storing a total of 100
channels, and conveniently stored in up to 27 groups,
from A to Z and “(No Group).” The A to Z groups can
also be named.
D Add a GPS memory
1. Adding GPS Memory and entering the edit mode
Push q
SET
(C) to enter the Set mode.
Touch the “GPS MEMORY” item of the “GPS” Set w
mode.
GPS > GPS Memory
• If the specied item is not displayed, touch [∫] or [√](D)
one or more times to select the page.
• All the previously added GPS memories are displayed.
Touch “(No Group).” e
Push r
QUICK
(C).
Touch “Add” to display the “GPS MEMORY EDIT” t
screen.
(Continued on the next page)
GPS Memory
(No Group)
B: Station
A: Icom Office
C: Airport
Z:
ICOM Head Office
Tokyo
Osaka
Push
QUICK
(C).
Touch “GPS”.
Touch
“GPS Memory”
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay
Touch
“(No Group)”
Touch “Add.”


“Edit” is selected when you wish to edit the previously
stored GPS memory. You enter the Edit mode in the same
way as adding.
Group names are just
example.
Previous view