10
GPS/GPS-A OPERATION
10-8
Add a GPS memory (Continued) D
2. GPS Memory name programming
Touch [NAME:] to enter the name programming y
mode.
Enter the name touching the desired block one or u
more times to select the desired character, number
or symbol.
Selectable characters and symbols
A to Z, a to z, 0 to 9, ! # $ % & \ ? " ’ ` ^
+ – ✱⁄ . , : ; = < > ( ) [ ] { } ¦ _ ¯ @ (space)
• Touch “AB⇔12” to toggle between the Alphabet input
and Number input mode.
• Touch [CLR](D) to delete the selected character, symbol
or number.
• Touch [ [AB] ](D) to open the input mode selection win-
dow.
• Touch “” to input a space.
Touch [ i f](D) or [g](D) to move the cursor backward
and forward.
Repeat steps o u and i to program up to 16 charac-
ters of a GPS memory name (space included).
!0 Touch [ENT]
(D) when the programming is completed.
• Returns to the “GPS MEMORY EDIT” screen.
Adding or editing GPS memory (Continued)
Touch
“NAME:”
Name programming
Moves the cursor.
Clears a character.
Open an input
mode window
Touch after enter-
ing.
Cancels and
returns to the
previous screen.
Space
Input mode selection window
Touch “ab” to select
the lower case
letters.
Example;
“Icom 01”
is entered.
q
w
q
3. GPS Memory date programming
!1 Touch “DATE:” to enter the date programming mode.
!2 Touch or hold down [+] or [–](D) under the changing
subject between Year, Month, and Day to program
the date.
• You can also change by using the dial.
• From 2000/01/02 to 2099/12/30 can be programmed.
!3 When the programming is completed, touch [](D)
to return to the “GPS MEMORY EDIT” screen.
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
To Next Page
Loading...
