Icom IC-7100 - Adding the Repeater Information Using the RX History

9
D-STAR OPERATION <ADVANCED>
9-41
This section describes how to add a new repeater infor-
mation to the repeater list using the RX history.
Push q
DR
(C) to enter the DR mode.
Touch [CD]( w D).
• The “RX HISTORY” screen are displayed.
Touch e [∫] or [√](D) to select the root item (“RX HIS-
TORY”).
Touch the desired repeater you want to add to the r
repeater list.
• The RX history detail screen is displayed.
Touch t [∫] or [√](D) to display “RXRPT1” and
“RXRPT2.”
Push y
QUICK
(C).
Touch “Add To RPT List”. u
Touch the repeater call sign that you want to add to i
the repeater list.
• The “REPEATER LIST EDIT” screen is displayed. The
selected repeater call sign is automatically programmed.
• If necessary, edit the contents. (pp. 9-30 to 9-37)
o Touch “<<Add Write>>.”
!0 Touch “YES.”
• The programmed contents are added to the repeater list,
and the display returns to the RX HISTORY screen.
How to switch the name display:
When the call sign is displayed on the RX HISTORY
screen, you can switch the display type to “Name Dis-
play.”
When the repeater name is not programmed in the
repeater list, the display does not switch to the name
display. It is convenient that you find a repeater that is
not included in the repeater list.
When the RX HISTORY screen is displayed, push ➥
QUICK
(C) to display the Quick menu. Then touch
“Name Display.”
Example:
“JP3YJJ A” is
added.
RX history number
“RXRPT1” and
“RXRPT2” are
displayed.
Adding the Repeater information using the RX History
Touch [CD].
Touch the RX
HISTORY
screen.
Touch
[√].
Push
QUICK
.
Touch
“Add To
RPT List.”
Touch the call
sign.
Previous view