12
SCAN OPERATION
12-4
Scan Set mode
The Scan speed, Scan Resume function, Pause Timer,
Resume Timer and the Dial function can be set in the
Scan Set mode.
Push q
(C) one or more times to select the “M-
1” (Menu 1) screen.
Touch [SCAN]( w D) to display the “SCAN” screen.
Touch [SET]( e D) to display the “SCAN SET” screen.
Touch the desired item. r
• To go back the previous tree level, touch [](D), or
(C).
Touch a desired option shown on the display. t
• When you touch an option, it is automatically saved and
goes back the previous tree level.
• Push
(C), and then touch “Default” to reset to the
default setting, if desired.
Push y
(C) to return to the “SCAN” screen.
Touch [SCAN]
Touch
[SET]
Touch a desired
item.
( Example:
SCAN Resume)
Touch a desired
option.
(Example: OFF)
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
To Next Page
Loading...
