Icom IC-7100

9
D-STAR OPERATION <ADVANCED>
9-12
Display type setting
The display size in the DR mode, such as a repeater
name, call sign, and so on, can be set to Large.
(Default: Normal)
Push q
QUICK
(C) to enter the Quick Set mode.
Touch the “Display Type.” w
• If the specied item is not displayed, touch [∫] or [√](D)
one or more times to select the page
.
Touch “Large.” e
• The display size changes to the same size such as the
repeater name set in “TO” and “FROM.”
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay
Touch
“Display Type”
Touch
“Large”
LargeNormal
Previous view