Icom IC-7100 Advanced Instructions

9
D-STAR OPERATION <ADVANCED>
9-19
D To announce the RX>CS call sign
The station call sign that is selected from the RX Histo-
ry by holding down
AUTO TUNE
RX
�
CS
(R), will be announced.
Push q
SET
(C) to enter the Set mode.
Touch the “RX>CS SPEECH” item of the “SPEECH” w
Set mode.
SPEECH > RX>CS SPEECH
• If the specied item is not displayed, touch [∫] or [√](D)
one or more times to select the page
.
Touch “ON.” (Default: ON) e
Push r
SET
(C) to exit the Set mode.
Push t
AUTO TUNE
RX
�
CS
(R), touch to select the station call
sign.
• If the station call sign is not displayed, touch [∫] or [√]
(D) one or more times to select the page
.
• After releasing
AUTO TUNE
RX
�
CS
(R), the selected station call
sign is announced.
• When “ON” is selected
Beeps
JG3LUK
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay
Speech function (Continued)
Touch
“SPEECH”
Touch
“RX >CS
SPEECH”
Push
AUTO TUNE
RX
�
CS
Touch
“ON”
Touch
“JG3LUK”
Push
SET
Previous view

Icom IC-7100 Specifications

General

Supply	13.8 V DC ±15%
Voltage	13.8 V DC
Operating Temperature	-10°C to +60°C
Frequency Coverage	0.030-199.999 MHz, 400-470 MHz
Modes	SSB, CW, AM, FM, DV
Output Power	HF/50MHz: 100W, 144MHz: 50W, 430MHz: 35W
Receiver Type	Superheterodyne
Antenna Connector	SO-239 (HF/50MHz/144MHz), N-type (430MHz)
Weight	Main unit: 2.3 kg
Type	Base/Mobile
Frequency Range TX	1.8–54 MHz, 144–148 MHz, 430–450 MHz
Frequency Range RX	0.030–199.999 MHz, 400–470 MHz
Memories	505
Current Consumption	TX: 22 A, RX: 1.2 A