7-1
Section 7
D-STAR INTRODUCTION
IMPORTANT!
• The repeater list described in this manual may differ from your transceiver’s preloaded contents.
• Although Japanese repeaters are used in the setting examples, the Japanese repeater node (port) letters are dif-
ferent from those in other countries.
Be sure to add a repeater node letter as the 8th digit in the call sign field after a repeater call sign according to the
repeater frequency band shown below.
1200 MHz: A (B in Japan)
430 MHz: B (A in Japan)
144 MHz: C (no D-STAR repeaters in Japan)
“MY” (Your own call sign) programming .............................7-2
D-STAR Introduction .............................................................7-5
About the DR (D-STAR Repeater) mode ..............................7-6
Communication Form in the DR mode ................................7-7
To Next Page
Loading...
