Icom IC-7100 Advanced Instructions

18
DATA COMMUNICATION
18-2
TNC
DATA IN
DATA OUT
(9600bps)
GND
AF OUT (1200bps)
PTTP
Rear panel view
TX AUDIO
RX AUDIO
PTT
GND
SQL*
q
r
w
t
e
y
SQL
DATA IN
DATA OUT
(9600bps)
GND
AF OUT (1200bps)
PTTP
TX AUDIO
RX AUDIO
PTT
GND
SQL*
q
r
w
t
e
y
SQL
PC
RS-232C
• When using a TNC
• When using a PC application
• When using a TNC
• When using a PC application
TNC
PC
RS-232C
Rear panel view
4
8
12
123
765
9
10 11
13
RTTY OUTPUT
AUDIO INPUT
PTT
GND
FSKK
AF
SEND*
GND
4
8
12
123
765
9
10 11
13
RTTY OUTPUT
AUDIO INPUT
PTT
GND
FSKK
AF
SEND*
GND
A
B
C
D
F
E
AFSK OUTPUT
AF INPUT
PTT
GND
SQL INPUT
• When using a TNC
• When using a PC application
AUDIO OUTPUT
AF INPUT
PTT
GND
A
B
C
D
Rear panel view
TNC
PC
RS-232C
D
B
A
〜
i
q
r
t
y
E
u
F
i
*
2
*
1
C
e
*
3
* When connecting the squelch
line, consult the necessary
manual (TNC, etc.).
• Select pin 7 (VSEND) and pin 3 (HSEND) output usage in the Set mode. (p. 17-26)
* e HF/50 MHz: HSEND
u 144/430 MHz: VSEND
*
1
When using the VOX function, no
connection is needed. Refer to the
instruction manual of the external
equipment.
*
2
When connecting the squelch line,
consult the necessary manual.
*
3
Using this terminal, the “MIC AF
Out” item is set to “ON” in “Func-
tion” Set mode. (p. 17-22)
Connect to the serial port,
parallel port, speaker jack,
microphone jack and line IN/
OUT jack and so on.
See the instruction manual
of the application for details.
Connect to the serial port,
parallel port, speaker jack,
microphone jack or line IN/
OUT jack and so on.
See the instruction manual
of the application for details.
Connect to the serial port,
parallel port, speaker jack,
microphone jack and line IN/
OUT jack, etc.
See the instruction manual
of the application for details.
D When connecting to [DATA2]
D When connecting to [ACC]
D When connecting to [MIC]
Connections
Previous view

Icom IC-7100 Specifications

General

Supply	13.8 V DC ±15%
Voltage	13.8 V DC
Operating Temperature	-10°C to +60°C
Frequency Coverage	0.030-199.999 MHz, 400-470 MHz
Modes	SSB, CW, AM, FM, DV
Output Power	HF/50MHz: 100W, 144MHz: 50W, 430MHz: 35W
Receiver Type	Superheterodyne
Antenna Connector	SO-239 (HF/50MHz/144MHz), N-type (430MHz)
Weight	Main unit: 2.3 kg
Type	Base/Mobile
Frequency Range TX	1.8–54 MHz, 144–148 MHz, 430–450 MHz
Frequency Range RX	0.030–199.999 MHz, 400–470 MHz
Memories	505
Current Consumption	TX: 22 A, RX: 1.2 A