Icom IC-7100 Advanced Instructions

9
D-STAR OPERATION <ADVANCED>
9-47
Editing a Your (destination) call sign
Touch
“Edit.”
This function reprograms a Your (destination) call sign’s
data. This is useful when already-programmed data is
incorrect, has changed or some data should be added
to the list.
Push q
SET
(C) to enter the Set mode.
Touch the “Your Call Sign” item of the “DV Memory” w
Set mode.
DV Memory > Your Call Sign
• If the specied item is not displayed, touch [∫] or [√](D)
one or more times to select the page
.
• The your call sign list are displayed.
e Touch the desired your call sign to be programmed
for 1 second.
• If the specied item is not displayed, touch [∫] or [√](D)
one or more times to select the page
.
r Touch [Edit](D).
• The “YOUR CALL SIGN EDIT” screen is displayed.
• See pages 9-45 to 9-46 for programming details.
t Touch “<<Overwrite>>.”
Touch “YES.” y
• The programmed contents are stored to the your call
sign list, and the display returns to the YOUR CALL SIGN
screen.
Touch
“YES.”
Touch
“<<Overwrite>>.”
“TOM/7100
JM1ZLK” is
programmed
into the Your
Call Sign
memory.
Touch the list
for 1 second.
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay
Previous view

Icom IC-7100 Specifications

General

Supply	13.8 V DC ±15%
Voltage	13.8 V DC
Operating Temperature	-10°C to +60°C
Frequency Coverage	0.030-199.999 MHz, 400-470 MHz
Modes	SSB, CW, AM, FM, DV
Output Power	HF/50MHz: 100W, 144MHz: 50W, 430MHz: 35W
Receiver Type	Superheterodyne
Antenna Connector	SO-239 (HF/50MHz/144MHz), N-type (430MHz)
Weight	Main unit: 2.3 kg
Type	Base/Mobile
Frequency Range TX	1.8–54 MHz, 144–148 MHz, 430–450 MHz
Frequency Range RX	0.030–199.999 MHz, 400–470 MHz
Memories	505
Current Consumption	TX: 22 A, RX: 1.2 A