10
GPS/GPS-A OPERATION
10-5
Checking GPS position (Continued)
D Saving your own or received position data
With this function, you can save the position informa-
tion of your station from wherever you are, and also the
position information of the station you received it from.
The GPS Memory is capable of storing 100 channels in
total, assignable to one of 27 banks, A to Z.
Push q
(C), and then touch “GPS Position.”
Touch [ w ∫]/[√](D) to display the screen that you want
to save between MY and RX.
• To save the position information of your station, select
MY.
• To save the position information of the station you re-
ceived from, select RX
Push e
(C).
Touch “Add To GPS Memory.” r
• “GPS Memory Edit” screen is displayed.
Touch t
[
∫]/[
√](
D)
to
select
<<Add
Write>>,
and
touch
“Yes.”
• The data is saved in the GPS memory and returns to the
“GPS Position” screen.
• The position information (Latitude/Longitude) is automat-
ically added.
• See pages 10-7 and 10-11 for details on editing.
Push y
(C) to exit the “GPS Position” screen.
MY
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
The GPS data
is saved in “(No
Group)” in the
“GPS memory”.
Select the MY
screen to save
your position.
Touch a Memo-
ry contents title
to edit.
(Exaple: Name)
GPS MEM-
ORY EDIT
screen is
displayed, and
Latitude/Longi-
tude is added.
Select a desti-
nation group to
save.
Touch to save
the edit.
To Next Page
Loading...
