Icom IC-7100 Advanced Instructions

9
D-STAR OPERATION <ADVANCED>
9-49
Select the call
sign you want
to delete.
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay
The Your (destination) call signs can be deleted from
the Your Call Sign memory.
Push q
SET
(C) to enter the Set mode.
Touch the “Your Call Sign” item of the “DV Memory” w
Set mode.
DV Memory > Your Call Sign
• If the specied item is not displayed, touch [∫] or [√](D)
one or more times to select the page
.
• The your call sign list are displayed.
e Touch the call sign you want to delete for 1 second .
• If the specied call sign is not displayed, touch [∫] or [√]
(D) one or more times to select the page
.
Touch “Delete.” r
t Touch “YES.”
• The programmed call sign contents are deleted from the
your call sign list, and the display returns to the YOUR
CALL SIGN screen.
Deleting Your (destination) call sign
Touch
“DV Memory.”
Touch
“Your Call Sign.”
Touch
“Delete.”
Touch
“YES.”
Touch the
call sign for
1 second.
Example:
“TOM” is
deleted.
Previous view

Icom IC-7100 Specifications

General

Supply	13.8 V DC ±15%
Voltage	13.8 V DC
Operating Temperature	-10°C to +60°C
Frequency Coverage	0.030-199.999 MHz, 400-470 MHz
Modes	SSB, CW, AM, FM, DV
Output Power	HF/50MHz: 100W, 144MHz: 50W, 430MHz: 35W
Receiver Type	Superheterodyne
Antenna Connector	SO-239 (HF/50MHz/144MHz), N-type (430MHz)
Weight	Main unit: 2.3 kg
Type	Base/Mobile
Frequency Range TX	1.8–54 MHz, 144–148 MHz, 430–450 MHz
Frequency Range RX	0.030–199.999 MHz, 400–470 MHz
Memories	505
Current Consumption	TX: 22 A, RX: 1.2 A