Icom IC-7100

9
D-STAR OPERATION <ADVANCED>
9-43
Push q
SET
(C) to enter the Set mode.
Touch the “Repeater List” item of the “DV Memory” w
Set mode.
DV Memory > Repeater List
• If the specied item is not displayed, touch [∫] or [√](D)
one or more times to select the page
.
• The repeater groups are displayed.
Touch the repeater group for 1 second, you want to e
program the name.
Touch “Edit Name” to enter the group name edit r
mode.
Touch the desired block one or more times to t select
the desired character or symbol.
Selectable characters and symbols
A to Z, a to z, 0 to 9, ! # $ % & \ ? " ’ ` ^
+ – ✱⁄ . , : ; = < > ( ) [ ] { } ¦ _ ¯ @ (space)
• Touch “AB⇔12” to toggle between the Alphabet input
and Number input mode.
• Touch [CLR](D) to delete the selected character, symbol
or number.
• Touch [ [AB] ](D) to open the input mode selection win-
dow.
• Touch “  ” to input a space.
Touch [ y f](D) to move the cursor backwards, or
touch [g](D) to move the cursor forwards.
Repeat steps u t and y to enter a name of up to 16
characters, including spaces.
After entering the name, touch [ENT]( i D).
Example:
“China” is
programmed.
Repeater group name programming
Touch
“Repeater List.”
Touch the re-
peater group for
1 second.
Example:
“21.”
Touch
“Edit Name.”
Touch [ENT].
Input mode selection screen
Name edit screen
Input a space
Move the cursor
Move the cursor
Delete a character
Select an input mode
Enter
Cancel edit
Open an input
mode window
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay
Previous view