Icom IC-7100 Advanced Instructions

12-1
Section 12
SCAN OPERATION
12-112-1
Scan types ..............................................................................12-2
Preparation .............................................................................12-3
Scan Set mode .......................................................................12-4
Voice Squelch Control function ...........................................12-6
Scan edge programming ......................................................12-7
Programmed scan (VFO mode) ............................................12-8
Fine programmed scan (VFO mode) ....................................12-9
Memory scan (Memory mode) ..............................................12-10
Memory scan
D
.........................................................................12-10
Mode Select scan
D
..................................................................12-11
Select Memory scan
D
..............................................................12-12
Setting/Cancelling Select Memory channels
D
.........................12-13
∂F scan and Fine ∂F scan (VFO mode/Memory mode) .....12-14
About the
D
∂F scan ................................................................12-14
About the Fine
D
∂F scan ........................................................12-15
VFO frequency and a priority channel .................................12-16
DR mode and a priority channel ..........................................12-17
Previous view

Icom IC-7100 Specifications

General

Supply	13.8 V DC ±15%
Voltage	13.8 V DC
Operating Temperature	-10°C to +60°C
Frequency Coverage	0.030-199.999 MHz, 400-470 MHz
Modes	SSB, CW, AM, FM, DV
Output Power	HF/50MHz: 100W, 144MHz: 50W, 430MHz: 35W
Receiver Type	Superheterodyne
Antenna Connector	SO-239 (HF/50MHz/144MHz), N-type (430MHz)
Weight	Main unit: 2.3 kg
Type	Base/Mobile
Frequency Range TX	1.8–54 MHz, 144–148 MHz, 430–450 MHz
Frequency Range RX	0.030–199.999 MHz, 400–470 MHz
Memories	505
Current Consumption	TX: 22 A, RX: 1.2 A