Icom IC-7100

13-1
Section 13
USING AN SD CARD
About the SD card .................................................................13-2
Saving data onto the SD card ...............................................13-3
Inserting the SD card ............................................................13-4
Formatting the SD card
D
.........................................................13-4
Removing the SD card ..........................................................13-5
Removing the SD card while the transceiver’s power is ON
D
.13-5
Saving the setting data onto an SD card .............................13-6
Saving with a different le name ..........................................13-7
Loading the saved data les that are on the SD card ........13-8
Backing up the data stored on the SD card onto a PC ......13-10
About the SD card’s folder contents
D
......................................13-10
Making a backup file on your PC
D
...........................................13-11
Updating the repeater list .....................................................13-12
Cloning Transceiver-to-Transceiver using an SD card .......13-15
Previous view