Icom IC-7100

9
D-STAR OPERATION <ADVANCED>
9-3
Enter the TX message2.
Touch the desired block one or more times to select t
the desired character or symbol.
(Example: J)
Selectable characters and symbols
A to Z, a to z, 0 to 9, ! # $ % & \ ? " ’ ` ^
+ – ✱⁄ . , : ; = < > ( ) [ ] { } ¦ _ ¯ @ (space)
• Touch “AB⇔12” to toggle between the Alphabet input
and Number input mode.
• Touch [CLR](D) to delete the selected character, symbol
or number.
• Touch [ [AB] ](D) to open the input mode selection win-
dow.
• Touch “  ” to input a space.
Touch [ y f](D) to move the cursor backwards, or
touch [g](D) to move the cursor forwards.
Repeat steps u t and y to enter up to 20 characters,
including spaces.
( Example: First, J, then A, then P, then A, then N,
then (space), then >, then T, then O, then M.)
Touch [ENT]( i D) to return to the “TX Message”
screen.
Tx message edit screen
Input a space
Move the cursor
Move the cursor
Delete a character
Select an input mode
Enter
Cancel edit
Enter “JAPAN >TOM” into [1:].
q Touch “JKL”
to enter ‘J.’
w Touch “ABC”
to enter ‘A.’
e Touch “PQR”
to enter ‘P.’
o Touch [√].
!0 Touch “ > ”
q
y
u
i
r
e
t
w
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay
Continued on the next page ☞
r Touch “ABC”
to enter ‘A.’
t Touch “MNO“
twice to enter
‘N.’
y Touch “  ” to
enter ‘space’
u Touch [ [AB] ].
i Touch “ !"# ” to
open the Sym-
bol character
selection win-
dow.
!0
o
Message operation (Continued)
Open an input
mode window
Previous view