Icom IC-7100

9
D-STAR OPERATION <ADVANCED>
9-27
Touch “UR:”
Touch “Gate-
way CQ”
Touch “USA
Midwest”
Touch
“Dallas”
Touch “R2:”
Touch “GW”
Gateway “R2” setting2.
Touch “R2:.” o
• The “RPT2 SELECT” screen is displayed.
!0 Touch “GW.”
• The display returns to the “CALL SIGN” screen.
• When you manually enter the call sign, touch “R2:” for
1 second in step !0.
NOT USED* For local area call
GW To select the gateway call sign
from the repeater list.
Repeater name To select the repeater that
has the same gateway as the
“R1”repeater.
Destination “UR” setting3.
!1 Touch “UR:.”
• The “YOUR SELECT” screen is displayed.
!2 Touch “Geteway CQ.”
• The “REPEATER GROUP” screen is displayed.
!3 Touch the desired Repeater group.
(Example: USA Midwest)
• The “RPT LIST GRP” screen is displayed.
!4 Touch the desired Repeater.
(Example: Dallas)
• The display returns to the “CALL SIGN” screen.
!5 Push
MENU
(C) to exit the “CALL SIGN” screen.
• When you manually enter the call sign, touch “UR:” for
1 second in step !1.
• If you want to memorizes this setting, touch [MW](D)
for 1 second in the “M-1” screen (M-1 menu).
Changing the Call sign setting (Continued)
Previous view