EasyManua.ls Logo

Icom IC-7100 - Page 371

Icom IC-7100
375 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
SPECIFICATIONS AND OPTIONS
21-2
Specications
General D
Frequency coverage: (unit: MHz)
Receive
0.030000 199.999999*
1
*
2
400.000000 470.000000*
1
*
2
Transmit
1.800000 1.999999*
2
, 3.500000 3.999999*
2
,
5.255000 5.405000*
1
*
3
,
5.332000*
3
*
4
, 5.348000*
3
*
4
, 5.358500*
3
*
4
,
5.373000*
3
*
4
, 5.405000*
3
*
4
,
7.000000 7.300000*
2
, 10.100000 10.150000*
2
,
14.000000 14.350000*
2
, 18.068000 18.168000*
2
,
21.000000 21.450000*
2
, 24.890000 24.990000*
2
,
28.000000 29.700000*
2
,
50.000000 54.000000*
2
,
70.000000 70.500000*
2
, 144.000000 148.000000*
2
,
430.000000 450.000000*
2
*
1
Some frequency ranges are not guaranteed.
*
2
Depending on version. *
3
USA version only.
*
4
Center frequency.
• Mode: USB, LSB, CW, RTTY, AM, FM,
WFM (RX only), DV
No. of memory channels: 495CH
(99CH × 5 bank)
No. of scan edge memory channels:
6 CH
(2 × 3 edges)
No. of call channels: 4 CH (2 × 2 band)
• Antenna connector: SO-239 × 2
Antenna impedance: 50 ø
• Usable temperature range:
–10˚C to +60˚C;
+14˚F to +140˚F
• Frequency stability: Less than ±0.5 ppm, 5 minutes
after power ON.
(0˚C to +50˚C;
+32˚F to +122˚F at 430 MHz band)
• Frequency resolution: 1 Hz
• Power supply: 13.8 V DC ±15%
(negative ground)
• Power consumption:
Transmit
Max. power: 22.0 A
Receive
Standby: 0.9 A
Max. audio: 1.2 A
• Dimensions (projections not included):
Main unit: 167(W) × 58(H) × 225(D) mm;
6.6(W) × 2.3(H) × 8.9(D) in
Controller: 165(W) × 64(H) × 78.5(D) mm;
6.5(W) × 2.5(H) × 3.1(D) in
Weight (approximately):
Main unit: 2.3 kg; 5.1 lb
Controller: 0.5 kg; 1.1 lb
• ACC connector: 13-pin
• DATA1 connector: 3-conductor 2.5 (d) mm (
1
10)
DATA2 connector: 6-pin
• REMOTE connector: 2-conductor 3.5 (d) mm (
1
8)
Transmitter D
Output power (at 13.8 V DC/+25˚C): (continuously adjustable)
Frequency band Output power
HF/50 MHz 2 to 100 W (AM: 1 to 30 W)*
70 MHz 2 to 50 W (AM: 1 to 15 W)*
144 MHz 2 to 50 W
430 MHz 2 to 35 W
* In the AM mode, transmission can be performed only on
the HF/50/70 MHz frequency band.
• Modulation system:
SSB: Digital PSN modulation
AM: Digital Low power modulation
FM: Digital Phase modulation
DV: GMSK Digital Phase modulation
• Spurious emission:
(Spurious domain)
HF bands: Less than –50 dB
50 MHz band: Less than –63 dB
70/144/430 MHz bands:
Less than –60 dB
(Out-of-band domain)
HF bands: Less than –40 dB
50/70/144/430 MHz bands:
Less than –60 dB
Carrier suppression: More than 50 dB
Unwanted sideband suppression:
More than 50 dB
• Microphone connector: 8-pin modular jack
• Microphone impedance: 600 ø
• ELEC-KEY connector: 3-conductor 3.5(d) mm (
1
8)
• KEY connector: 2-conductor 3.5(d) mm (
1
8)
Previous view

Table of Contents

Other manuals for Icom IC-7100

Related product manuals