Changes for CANBERRA Health Physics Monitors
VERSION 9.01 SOFTWARE (160524)
6 of 8
13. F3 – Setup, F4 – Out of Service Causes.
Added setting Krypton Rate [WARN] that is always [WARN] when enabled [A][S]
Removed connection to Krypton Mode from setting High Bkg Rate []. [A][S]
Removed Suggest Mode Fault [] [A][S][G]
14. F3 - Setup, F7 – Data Log
Changed Date Time column D label to “YYYY-MM-DD hh:mm:ss.000" for all log files.
This is ISO format and can be used in Excel to format this column.
Service [File] (SERVICE.CSV)
Added “Auto Balance” when an Auto Balance is started on a TPS-BG-579 detector. .
[A][S]
Added “File Maintenance” when a File Maintenance sequence is started. .
[A][S][G][C]
Added “Database Maintenance: when Database Maintenance sequence is started.
[A][S][G][C]
Added “Local WebRemote” when WebRemote is started on local monitor (via double
click in lower right). [A][S][G][C]
Added “Remote Setup” when Remote Setup is started due to WebRemote user Login
(followed by setting change or button command). [A][S][G][C]
Improved logging of Decision Threshold fault (Bayesian methodology) [A][S][G][C]
Changed “Badge Reader Fault: to more correct "Dosimeter Reader Fault"
Changed “In Service” descriptor to match F1 choice made. See Service Menu
changes.
15. F3 – Setup, F8 – Printouts.
Changed Keep Calibration Results [3660] days default and maximum values from 366
days to 3660 days (1 year to 10 years). [A][S][G][C]
16. F3 – Setup, F11 – Operation Instructions, F5 – Contaminated. [A][S][G][C]
Added No Last Contaminated [] setting. Default [Not Available].
17. F3 – Setup, F11 – Operation Instructions, F7 – Out of Service.
Removed Suggest Krypton Mode Service Instruction [] setting [A][S][G]
Removed Suggest Normal Service Instruction [] setting [A][S][G]
18. F4 – Faults.
Added Zone Fault Krypton Bkg Rate [A][S][G]
Removed Suggest Krypton Mode Service [A][S][G]
Removed Suggest Normal Mode Service [A][S][G]
Changed "Badge Reader" to more correct "Dosimeter Reader" [A]
19. F5 – Information Menu, F1 – Monitor History [A][S][G][C]
Added Clear button to WebRemote [Reports] [Monitor History]
Added “Service Menu” tally
Added “Remote Setup” tally