Mirion Technologies GEM-5 User Manual

Changes for CANBERRA Health Physics Monitors
VERSION 9.01 SOFTWARE (160524)
7 of 8
20. F5 – Information Menu, F2 – Service History [A][S][G][C]
 Added "Auto Balance Done" tally
 Added "File Maintenance" tally
 Added "Database Maintenance" tally
 Added "Local WebRemote" tally
 Added "Remote Setup" tally
 Removed “Suggest Krypton Mode” tally
 Removed “Suggest Normal Mode” tally
21. F5 – Information Menu, F7 – System Status [A][S][G][C]
 Added MAC Address [] (unique to each computer)
22. F6 – Printout Menu, F1 – Monitor History [A][S][G][C]
 Added “Service Menu” tally
 Added “Remote Setup” tally
23. F6 - Printout Menu, F2 - Service History. [A][S][G][C]
 Added "Auto Balance Done" tally
 Added "File Maintenance" tally
 Added "Database Maintenance" tally
 Added "Local WebRemote" tally
 Added "Remote Setup" tally
 Removed “Suggest Krypton Mode” tally
 Removed “Suggest Normal Mode” tally
Web Remote Improvements
1) Improved WebRemote [Login] so it doesn’t put Monitor in “Remote Setup” until a setting or
test screen (that can change operation of monitor) is accessed.
2) Changed Remote Setup to update SETUP.TXT file when leaving screen if a setting change
was made
3) Improved WebRemote [Place in Service] choices to be kept up to date with available choices.
Also added [Maintenance Mode], [Leave in Current Mode] and [Exit Monitor Program] choices
Other choice is one of : "Normal Service", "Conditional Service", "No Database Conditional
Service", "Gamma Only Conditional Service", "No Database Gamma Only Conditional
Service", "Frisker Only Conditional Service", "No Database Frisker Only Conditional Service",
"Krypton Mode Service", "Krypton Mode Conditional Service", "No Database Krypton Mode
Conditional Service", "Gamma Only Krypton Mode Conditional Service", "No Database
Gamma Only Krypton Mode Conditional Service", "Frisker Only Krypton Mode Conditional
Service", "No Database Frisker Only Krypton Mode Conditional Service"
4) Fixed WebRemote [Calibration] [Calibration] count time calculation to use settings changed
by [Settings]
5) Added Clear button to [Reports] [Service History]
6) Removed [Faults] Suggest Service Mode [Krypton] or [Normal]
7) Added Bench Test View [YES] or [NO] setting to several [Diagnostic] screens
o [Amplifier Pulse Test]
o [HVPS Meter]
o [Rate Meter]
o [Sensor Board]
o [Auxiliary Sensor Board]

Mirion Technologies GEM-5 Specifications

General

Brand	Mirion Technologies
Model	GEM-5
Category	Monitor
Language	English