Olympus nortec 600 - Figure 5-72 Materials-Special and Educational Applications; Models; Using the Impedance Plane Theory and Display

To Next Page

To Previous Page

DMTA-10040-01EN, Rev. E, February 2018

Chapter 5174

Figure 5‑72 Materials—special and educational applications

• Surface probe: reflection detachable surface probe with a diameter of 11.2 mm

(0.44 in.) and an operating range of 500 Hz to 60 kHz (equivalent to APBK/10.5/S,

SPO-2025), triaxial Fischer/LEMO connector; P/N: 9213552 SR/500Hz-60KHZ-/.44

[U8623007]

• SPO-6687 cable for reflection coil configuration probes with triaxial

Fischer/LEMO connector to NORTEC 500, 600, 1000, or 2000 series instrument

(16 pin LEMO), 1.83 m (6 ft.) length; P/N: SPO-6687 [U8800538]

• General purpose demonstration and training standard; P/N: NEC-6151-SD

[U8861706]

5.2.1 Using the Impedance Plane Theory and Display — All NORTEC 600

Models

This application is usually one of the first topics used to explain basic eddy current

theory in eddy current training classes.

Olympus nortec 600 - Figure 5-72 Materials-Special and Educational Applications; Models; Using the Impedance Plane Theory and Display - All NORTEC 600