DMTA-10040-01EN, Rev. E, February 2018
Chapter 6324
To unlock options
1. Connect your PC to the instrument using a USB cable.
2. On the NORTEC PC software Device menu, select Unlock Options (see
Figure 6-26 on page 324).
The Unlock Options dialog box opens (see Figure 6-27 on page 324).
Figure 6‑26 The Unlock Options command
3. In the Unlock Options dialog box, enter the license key, and then click OK.
Figure 6‑27 The Unlock Options dialog box
4. Turn off, and then turn on the NORTEC 600.
After cycling the power, the new NORTEC 600 instrument features are unlocked
and ready for use.
To Next Page
Loading...
