Olympus nortec 600 - Figure 4-13 the SHOW READINGS Function; Figure 4-14 the HIDE READINGS Function

DMTA-10040-01EN, Rev. E, February 2018
Control Functions 93
Figure 4‑13 The SHOW READINGS function
Figure 4‑14 The HIDE READINGS function
RECALL
Resets the instrument and loads the instrument settings associated with the data
file that is recalled.
To recall a stored data file, press the MEM menu key ( ), rotate the knob until
the desired data file is highlighted, and then press the B key. The instrument
recalls the data file with the instrument settings that were stored when the data
file was saved.