Olympus nortec 600 - Figure 5-76 Adjusting the Gain; Figure 5-77 Displaying the Effect of Conductivity and Magnetic Permeability; Sorting Metals by Evaluating Conductivity - All NORTEC 600 Models

DMTA-10040-01EN, Rev. E, February 2018
Using the Instrument 177
Figure 5‑76 Adjusting the gain
11. Press the FULL NEXT key ( ) to toggle to full-screen mode, then successively
place the probe on each sample to display the effect of conductivity and magnetic
permeability on the impedance plane (see Figure 5-77 on page 177).
Figure 5‑77 Displaying the effect of conductivity and magnetic permeability
5.2.2 Sorting Metals by Evaluating Conductivity — All NORTEC 600 Models
This application shows how to sort metals by using differences in conductivity and
resistivity, which can be viewed on the impedance plane display. This method is only
valid for non-ferromagnetic metals.